What is the method for partitioning dual hard drives in CentOS 7?

The method for partitioning dual hard drives on CentOS 7 is as follows:

1. Firstly, you need to determine the device names of the two hard drives. You can use the following command to list the device names of all hard drives:
2. List all available disks and partitions.
3. Typically, the device name for a hard drive is /dev/sdX, where X is a letter that represents a different hard drive.
4. Partition the first hard disk using the following command:
5. Partition the disk sda.
6. This will open an interactive partition tool. You can use the following commands to create and adjust partitions:
7. n: Set up a new partition.
8. d: delete a partition
9. P: Print the partition table.
10. w: save and exit
11. When creating a partition, you will need to choose the type of partition (primary or logical) and the size of the partition.
12. Repeat the above steps to partition the second hard drive.
13. Partition the device /dev/sdb using fdisk.
14. After the partition is complete, you can use the following commands to view the partition information:
15. List the disk partitions.
16. This will display information about all the partitions of the hard drive.

Please note that this is just an example of a partitioning method. Depending on your needs, you can choose other tools and methods to complete the partitioning operation.