How to set up a v2ray node on OpenWRT?

2 years ago
Benjamin Taylor
2 minutes

To set up a V2Ray node on OpenWrt, you need to follow these steps:

  1. Access the management interface of the OpenWrt router.
  2. On the “Software Packages” page, click the “Update List” button and wait for the list to finish updating.
  3. In the search box, type “v2ray” to locate the “v2ray-core” software package and select it.
  4. Click the “OK” button, then click the “confirm” button to start installing the v2ray-core software package.
  5. After installation is complete, select “Boot options” from the “System” menu.
  6. In the “Startup Items” page, locate “v2ray” and check it, then click the “Save & Apply” button.
  7. Select “Firewall” under the “Network” menu, then click on the “Edit” button.
  8. On the “Firewall Settings” page, locate the “Zone Configuration” section and click on the “Edit” button for the “WAN” zone.
  9. Add the following rules in the “Custom Rules” box in the “Wan” area.
  10. Add a rule to the NAT table in iptables that redirects incoming TCP traffic on port “端口号” to port 12345.
  11. Replace “port number” with the port number you want to use.
  12. Click the “Save & Apply” button, and then restart the router.
  13. In your V2Ray client, set the server address to the public IP address of your OpenWrt router, and adjust the port number to the one you set in step 9.
  14. Adjust settings in other V2Ray clients, such as the transport protocol and encryption method.
  15. Connect to the V2Ray node to ensure everything is functioning properly.

Please note that these are just basic steps to set up a V2Ray node, the specific configuration may vary depending on your needs and network environment. It is recommended to refer to V2Ray’s official documentation or seek more detailed guidance on relevant forums.

bannerAds