DIY Palu Electric Stick Tutorial

The fantasy creature Palu Electric Stick is a type of toy gear that can be made using the following steps:

Ingredients:

1. A wooden stick measuring about 60 centimeters in length.
2. A roll of wiring (plastic insulated wiring recommended)
3. a battery pack
4. One battery (compatible with the battery case model)
5. a switch
6. A pair of insulated wire strippers
7. Some insulation tape.

Steps:

1. Firstly, use insulation tape to secure the battery case to one end of the wooden stick. Make sure the battery case is tightly fixed to the stick, and that the switch on the battery case is easy to operate.
2. Use insulated wire strippers to strip a section of bare metal wire from one end of the wire, and insert the bare wire into the positive terminal of the battery box. Ensure the wire makes good contact with the terminal, and use insulation tape to secure the wire.
3. Insert the battery into the battery holder and connect the other end of the battery to the other end of the wire. Similarly, use insulated wire strippers to strip a section of bare wire and insert it into the negative terminal slot in the battery holder. Make sure the wire makes good contact with the slot and secure the wire with insulating tape.
4. Use insulating tape to connect the two metal contact points on the battery box switch in order to keep the circuit in a closed state.
5. Check if the battery box and switch are securely fixed, and if the wires are connected properly.
6. Finally, use insulation tape to neatly wrap the wires around the wooden stick in order to protect them from damage.

After assembly, you can make the magical creature Palu electric baton emit current by flipping the switch, and be careful not to touch the exposed wires to avoid accidents. Please note that the Palu electric baton is a toy equipment, it is intended for entertainment purposes only and must not be used to harm others.