Install RAID Driver on CentOS 7

1 year ago
Olivia Parker
1 minute
  1. Ensure that the array card is installed in the computer and connected to the hard drive.
  2. Open the terminal and enter the following command to check if the driver for the array card has been loaded in the system:
lsmod | grep <driver_name>

refers to the name of the driver for the array card you are using.

  1. You can manually load the driver by using the following command if the array card driver is not loaded.
modprobe <driver_name>

Similarly, is the name of the driver for the RAID card you are using.

  1. If the driver for the array card is successfully loaded, you can use the following command to check if the hard drive is recognized.
lsblk

This will confirm whether the array card driver has been successfully loaded and recognized the hard disk drive.

  1. If the driver for the RAID controller cannot be loaded or cannot recognize the hard drive, it may be necessary to download and install the latest driver or contact the technical support of the relevant manufacturer.
bannerAds