How can CentOS mount a storage server?

2 years ago
Ava Mitchell
1 minute

To mount a storage server onto the CentOS operating system, follow these steps:

  1. Ensure that the storage server and CentOS server are on the same network and able to communicate with each other.
  2. Create a directory on the CentOS server for mounting the storage server. For example, create a directory named /mnt/storage.
sudo mkdir /mnt/storage
  1. Network File System (NFS) utilities
sudo yum install nfs-utils
  1. The file located at /etc/fstab
  2. The IP address is 192.168.0.100.
  3. Can you pass me the document?
  4. The file responsible for managing file systems in Unix-based operating systems is known as /etc/fstab.
192.168.0.100:/share /mnt/storage nfs defaults 0 0
  1. Mount the storage server by executing the following command:
sudo mount -a
  1. Verify if the mounting was successful.
df -h

You should see that the shared directory of the storage server has been mounted to the /mnt/storage directory.

Please note that the above steps assume the storage server is sharing files via NFS. If the storage server is using a different protocol such as SMB/CIFS, you will need to install the appropriate software package and use the corresponding commands to mount the files. Please refer to the documentation of the storage server for more detailed information.

bannerAds