CentOS 7 RAID Drivers: Complete Installation Guide

2 years ago
Ava Mitchell
1 minute

To load RAID drivers into the CentOS 7 system, you can follow these steps:

  1. Make sure you have downloaded the Linux driver for your RAID controller and saved it on your local hard drive.
  2. Boot up the CentOS 7 system and log in as the root account.
  3. Type the following command in the terminal to load the RAID driver.
  4. Load the driver module with the command modprobe .
  5. For example, if your RAID controller is an Intel RAID controller, you can use the following command to load the appropriate driver:
  6. Load the megaraid_sas module.
  7. To check if the RAID driver has been successfully loaded, you can use the following command:
  8. list the loaded modules and search for
  9. To automatically load RAID drivers after the system restarts, you can edit the /etc/modules-load.d/modules.con file and add the following content:
  10. Module name
  11. Restart the system for the changes to take effect.

By following the steps above, you can successfully install RAID drivers into a CentOS 7 system.

bannerAds